DOWNLOAD:(Manager Plus Firmware )

We Suggest that you upgrade your 4 Port DMX Manager Plus Node to the latest firmware which is 3.0.2.6.

• Please download the file above and save it to the "firmware" directory in your Pathport Manager 3 installation. This is normally "C:\Program Files\Pathport Manager 3\firmware\".
• Connect the 4 Port DMX Manager Plus Node to your computer and configure your computer's IP and subnet mask to the correct address. (Unless changes have been made to the IP address of the Manager this setting should be 10.0.0.x and 255.0.0.0)
• Start Pathport Manager 3 and first check that your Pathport Communications IP is configured to the IP address from the previous step (Options>Pathport Communications>Setup).
• Check the box under (Options>Pathport Communications>Enable Firmware Uploads).
• Restart Pathport Manager 3
• Ensure that the settings in (Options>Pathport Communications>Configure Bootp Server) are correct for your current network settings.
• If the above settings are correct please hit the "Upgrade all Nodes" button (Options>Pathport Communications>Upgrade all Nodes). Respond "no" when asked if there are any version 2 Pathports on your network.
• The upgrade should be complete and your 4 Port DMX Manager Plus Node should now be running the most current firmware.
  

If you require assistance with the installation or upgrade please email This email address is being protected from spam bots, you need Javascript enabled to view it or contact technical support.