Pathway DMX interface control and Douglas 2-wire relay design!

If you require DMX control of power relay panels, Douglas Lighting Controls panels with Pathway Connectivity controllers is the answer.

Built using Pathway interface modules and the Douglas Lighting Controls PWEx relay system, these cabinets support both DMX and remote switch control of the relays.  DMX relays are suitable for switching monitors, discharge lamps, flourescent or neon loads.

The Pathway interface module provides a fully user-configurable soft patch.  Relays can be controlled starting from a base DMX address; or each relay can be soft-patched to a discrete DMX channel; or one DMX channel can control multiple relays. 

The interface card is Remote Device Management (RDM) compliant, making possible remote discovery of the card and relays, remote configuration, status monitoring, cycle logging and more, all via the DMX network when using an RDM enabled controller.

Control

• Control using DMX512 and/or auxiliary switch input

• RDM (Remote Device Management) compliance allows configuration over the DMX network

• Full, user-configurable soft patch

• Auxiliary switch input (over-ride) can be assigned to any or all relays

• Status quo maintains relay status in the event of DMX signal interruption

• Diagnostics include status LEDs and relay self-test

• Field selectable scan rate - relays can fire sequentially or in groups of four, eight, twelve or twenty-four

Relays

• 2-wire relay design minimizes wiring requirements

• Durable latching relays - UL endurance tested to 150,000 cycles

• Suitable for high in-rush applications

• 1 or 2 pole relays available

• 20A - 120/277/347VAC (single pole) or 20A - 120/277/347/480VAC (double pole) 

Cabinet

• Enclosures available in compartment or wire-way barrier styles

• Available in NEMA 1 and NEMA 4, with multiple cover and other options

• UL and CSA Listed