A single port DMX node designed for enclosure use. 

A DIN-rail mountable single port DMX node with all the features expected in a Pathport product.  Ideal for feeding data to LED installations or eDIN interface cards.

Features

• Cross fade between inputs on loss or gain of signal

• E1.31 streaming ACN input priority and magic channel input selection

• Supports both final draft and ANSI standard streaming ACN

• Single DMX port, user configurable as an input or output
  

• Standard RJ45 jack for network wiring
  

• Five pin terminal block for DMX or RJ45 connector that's switchable between standard DMX pin-out and the Color Kinetics wiring schemes

• Address up 128 universe

• Can be hard-configured to one of four universes or set for soft patching

• Soft patch between all inputs on a universe or channel-by-channel basis, with full merging and prioritization according to need

• LED indicators for network and DMX status

• Runs on power-over-Ethernet or local auxiliary power

• Fully compliant with E1.20 Remote Device Management standard

• Discover up to 128 RDM-enabled devices

• Supports all major Ethernet protocols

• ETC Net2 (as output node)

• Strand Shownet

• Pathport

• E1.31 Streaming ACN (Net3)
  

• ArtNet
  

 Model Description

1011	Pathport eDIN single port node

 Accessories

  

1001	eDIN 30WPower Supply
1105	eDIN Small Enclosure
1106	eDIN Large Enclosure
4000	Preassembly Service