49xx - Mxx-xx-xx-xx-xx-xx - Pxx

eDIN modules offer the system integrator a flexible way of creating custom solutions to DMX control challenges.  Pathway now offers a simple method of generating a single part number to describe these customized assemblies.  The same assembly is now easily re-ordered from Pathway, for other jobs requiring the same configuration in future.

All custom assemblies receive an ETL safety certification.  Pricing is predictable, and is based on enclosure size and the number of modules installed. 

And Pathway can offer further customization, including adding solid state relays or LED power supplies. If what you need isn't included here, please contact the factory.

Specifying Custom Assemblies

 The custom assembly part number scheme consists of three sections:

49xx - Mxx-xx-xx-xx-xx-xx - Pxx

On the left is the enclosure style.  In the center are the eDIN modules desired.  And on the right is the power supply.Up to six eDIN modules may be specified, depending on the enclosure type.

Enclosure Style

4905 = Small enclosure with 9.5" (240mm) of DIN rail space

           Choose up to two A-type modules or one only of either the B- or C-type modules

4906 = Large enclosure with 19.5" (495mm) of vertical DIN rail space

           Choose up to four A-type modules, three B-type modules or 2 C-type modules

           Or mix and match according to module sizes

4907 = Large enclosure with three 9.5" (240mm) horizontal sections of DIN rail 

           Choose two A-type or one only of either the B- or C-type modules per section of DIN rail

eDIN Module Selection

A-type modules (4.5" long - 115mm)

02 = 1-in, 4-out DMX Repeater (eDIN #1002)

07 = 2-in, 1-out DMX Merger (eDIN #1007)

11 = Pathport eDIN 1-port node (eDIN #1011)

B-Type modules (6.25" long - 160mm)

04 = 16 channel DMX-to-Analog (eDIN #1004)

06 = 24 Channel Analog-to-DMX (eDIN #1006)

09 = 1-in, 4-out DMX/RDM Splitter (eDIN #1009)

C-Type module (8" long - 200mm)

03 = 12 channel Contact Closure (eDIN #1003)

08 = 6 channel LED Dimmer/DC Driver (eDIN #1008)

Power Supply (PSU)

P01 = 24VDC, 30W output; 110/240VAC 50/60 Hz input

Other power supplies available on request.

Pricing