Pathport C-series nodes are suitable for permanent wall installation or portable use.

PATHPORT® C - Series Features- *NEW* Now supports ETC Net2 as an DMX output node
- *NEW* Crossfade between inputs on loss or gain of signal
- *NEW* Streaming ACN input priority and magic channel input selection
- Two DMX512 ports
- Distribute up to 128 DMX universes
- Powerful DMX routing capabilities
- Patch on a universe or channel-by-channel basis
- Fully compliant with E1.20 Remote Device Management standard
- Discover up to 128 RDM-enabled devices per node
- Many DMX network products in one:
Channel patch Backup switch Priority switch Merger Manager - LCD screen provides status feedback and soft-labelling capabilities
- Powered directly over Ethernet Cat 5 cable (POE)
- Easy system configuration
- Low installed cost
- Fits in a standard recessed 2 gang electrical backbox
- ETL listed
Supports the following Ethernet protocols: - Strand ShowNet
- Pathport
- ArtNet
- Streaming ACN (sACN/Net3)
- ETC Net2 (output only)
Model Description| 6201 | Pathport C Node with 2 - DMX inputs | | 6202 | Pathport C Node with 2 - DMX outputs | | 6203 | Pathport C Node with 1 DMX input & 1 DMX output |
Accessories| 6901 | Surface Mount Enclosure Required for surface mounting | | 6911 | Portable Enclosure For portable or hanging use. Includes Neutrik EtherCon RJ45 | | 6001 | Pathport single node in-line power injector Pathport power injector is not required if a powered switch is used | | 6010 | Pathport Manager software on CD Also available for free download below |
To download a copy of the Pathport Manager configuration software, click here. |