Hardware Overview

Choreo consists of a 7" capacitive touchscreen housed in an aluminum bezel which can be mounted in a standard 3-gang wallbox.


The back has the following connectors:

See Data Connections for proper wiring of the ports.


In addition to the connectors, there are three indicator LEDs:

On the right hand side of the unit is a small pinhole which may be depressed with a paperclip during powerup to default to factory settings. This should only be done with the advice of technical support staff.



Provide with each Choreo is a small screwdriver for use when wiring the connectors. The supplied adaptor plate to fit to a standard wallbox. The unit slips on from the top and is fastened at the bottom with two allen key set screws. The 1/16" allen wrench needed is included in the packaging.