eDIN #1002 Opto-splitters feature one isolated input and four buffered outputs.

 eDIN #1002

An essential part of any permanent DMX512 distribution system, the DIN-rail mountable eDIN #1002 enables ‘star’ wiring configurations of DMX512 data lines. Each buffered output is isolated from the DMX input and protects all connected end-devices from harmful electrical faults and ground loops.

  • One DMX512 input
  • Four buffered DMX512 outputs
  • One passive  DMX512 thru connector
  • Pluggable terminal  blocks for all connectors
  • Power and data easily daisy-chained between modules
  • DMX IN indicator
  • DC Power input indicator
  • ISO 5V indicator
  • Termination switch
  • No fuses— self-resetting port protection recovers from voltage faults
  • DIN rail mounting section included
  • 1500V opto-isolation between input and output ports
  • 250V fault protection on input and output ports
  • Input operating voltage: 9-30 VDC
  • 5W power consumption
  • Operating conditions: -10 to +50°C; 10-90% relative humidity, non-condensing
  • ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
  • RoHS 2002/95/EC
  • Class 2 Low Voltage
  • 0.50 lbs (0.26 kg)
  • 3.6”W x 4.5”L x 1.5”H  (91mm x 115mm x 38mm)

Model

Description

1002

eDIN Opto-Splitter, 4-Way

For pre-assembled, contractor-friendly installation repeaters based on the #1002 interface, please order from the following part numbers:

4807

eDIN Installation Repeater, 4-way, c/w power supply,
internally pre-wired, ETL-listed

4808

eDIN Installation Repeater, 8-way, c/w power supply,
internally pre-wired, ETL-listed

4809

eDIN Installation Repeater, 12-way, c/w power supply,
internally pre-wired, ETL-listed

4810

eDIN Installation Repeater, 16-way, c/w power supply,
internally pre-wired, ETL-listed

Accessories

1001-030-24-DIN

30 Watt, 24VDC Power Supply, DIN-Mountable

1001-100-24-DIN

100 Watt, 24VDC Power Supply, DIN-Mountable

1103

eDIN Rack Mount Panel,
2RU high, two 16.5" DIN Rail

1105

eDIN System Enclosure, 10" x 13" x 4.5"
c/w One 9" Vertical DIN Rail

1106

eDIN System Enclosure, 10" x 23" x 4.5"
c/w One 19" Vertical DIN Rail

1107

eDIN System Enclosure, 10" x 23" x 4.5"
c/w Three 9" Horizontal DIN Rail

1108

eDIN System Enclosure, 10" x 13" x 4.5"
c/w Two 9" Horizontal DIN Rail

1109

Expanded eDIN System Enclosure 18.5" x 31.5" x 6.5"
c/w Three 24"Vertical DIN Rail,
One 18” DIN Rail in Class 1 section,
two 3-gang knockouts in removable door

4000

eDIN Enclosure Assembly Service

Resources:

Data Sheet

Manual

Drawings:

.DWG    .PDF

Specification