Pathway eDIN LED Dimmer/DC Driver provides control over common anode LED fixtures and solid state relays.

1008 LED Dimmer/DC Driver

The eDIN #1008 provides direct pulse-width modulation (PWM) control of common anode, constant voltage LED fixtures—typically string lighting.  Multiple modes, including 16-bit, ensure a smooth dimming curve.  The module also provides efficient switching control of DC devices such as solid state relays and solenoids.

  • DMX512 start address and operating mode may be set from front panel interface or remotely using E1.20 RDM
  • Controls constant voltage LED fixtures rated between 5 to 30 VDC
  • Six PWM outputs, individually fused at 4A
  • 6A-fuse model available for use with 12V LED fixtures
  • Two spare fuses included
  • DMX512-present relay (normally open or normally closed)
  • Contact closure ‘panic’ input drives all outputs to full
  • Auxiliary 0-10V analog inputs HTP-merged with DMX input
  • Indicator LEDs for power, processor, DMX input, active output
  • User-adjustable smoothing algorithm
  • User-adjustable minimum and maximum output levels
  • Multiple loss-of-signal options
  •  Pluggable terminal block connections accept solid or stranded wire between #26 and #16 AWG
  • One DMX512-A/RDM data input connection
  • One passive DMX512-A data through connection
  • Data and power easily daisy-chained between modules
  • Termination switch
  • User-initiated diagnostics and test modes
  • Firmware field-upgradable using RDM (requires Pathway Pathport gateway and RDM utility program)
  • Default LED Control
  • DMX Double Precision with Curve
  • DMX Double Precision without Curve
  • Non-Dim Mode
  • Single Channel Control
  • Three Channel Mirror with Curve
  • Three Channel Mirror without Curve
  • 4A at 24VDC per output maximum (96W)
  • 1500V opto-isolation between input and output ports
  • 250V fault protection on input and output ports
  • Input operating voltage: 9-30 VDC
  • 5W power consumption
  • Operating conditions: 0-50°C; 10-90% relative humidity, non-condensing
  • ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
  • ANSI E1.20 RDM(2010) - Remote Device Management
  • RoHS 2002/95/EC
  • Class 2 Low Voltage
  • 0.70 lbs (0.316 kg)
  • 3.6”W x 8.0”L x 1.5”H  (91mm x 200mm x 38mm)




eDIN Constant Voltage Dimmer/DC Driver, 4A fuse


eDIN Constant Voltage Dimmer/DC Driver with 6A fuse -
use with 12V fixtures



30 Watt, 24VDC Power Supply, DIN-Mountable


100 Watt, 24VDC Power Supply, DIN-Mountable


eDIN Rack Mount Panel,
2RU high, two 16.5" DIN Rail


eDIN System Enclosure, 10" x 13" x 4.5"
c/w One 9" Vertical DIN Rail


eDIN System Enclosure, 10" x 23" x 4.5"
c/w One 19" Vertical DIN Rail


eDIN System Enclosure, 10" x 23" x 4.5"
c/w Three 9" Horizontal DIN Rail


eDIN System Enclosure, 10" x 13" x 4.5"
c/w Two 9" Horizontal DIN Rail


Expanded eDIN System Enclosure 18.5" x 31.5" x 6.5"
c/w Three 24"Vertical DIN Rail,
One 18” DIN Rail in Class 1 section,
two 3-gang knockouts in removable door


eDIN Enclosure Assembly Service