4813

eDIN modules offer the system integrator a flexible way of creating custom solutions to DMX control challenges. Pathway now offers a simple method of generating a single part number to describe these customized assemblies. The same assembly is now easily re-ordered from Pathway, for other jobs requiring the same configuration in future.
 
All custom assemblies receive an ETL safety certification. Pricing is predictable, and is based on enclosure size and the number of modules installed.

Pathway can offer further customization, including adding solid state relays or LED power supplies. If what you need isn't included here, please contact the factory.

.

Specifying Custom Assemblies
 .
 The custom assembly part number scheme consists of three sections:
 .
49xx - Mxx-xx-xx-xx-xx-xx - Pxx
 .
On the left is the enclosure style. In the center are the eDIN modules desired. And on the right is the power supply. Up to six eDIN modules may be specified, depending on the enclosure type.
 .
 .

.
Enclosure Style

4905

(1105 Enclosure)

  Small enclosure with 9" (228mm) of DIN rail space. (Vertical)

  Choose up to two A-type modules or one only of either the B- or C-type modules

4906

(1106 Enclosure)

  Large enclosure with 19.5" (495mm) of vertical DIN rail space.

  Choose up to four A-type modules, three B-type modules or 2 C-type modules.

  Or mix and match according to module sizes.

4907

(1107 Enclosure)

  Large enclosure with three 9" (228mm) horizontal sections of DIN rail.

  Choose two A-type or one only of either the B- or C-type modules per section of DIN rail.

4908

(1108 Enclosure)

  Small enclosure with 9" (228mm) of DIN rail space. (Horizontal)

  Choose up to two A-type modules or one only of either the B- or C-type modules

 

.

eDIN Module Selection

A-type modules (4.5" long - 115mm)

02   1-in, 4-out DMX Repeater (eDIN #1002)
07   2-in, 1-out DMX Merger (eDIN #1007)
11   Pathport eDIN 1-port gateway (eDIN #1011)
12   Pathport eDIN 2-port gateway (eDIN #1012)

.
B-Type modules (6.25" long - 160mm)

04   16 channel DMX-to-Analog (eDIN #1004)
06   24 Channel Analog-to-DMX (eDIN #1006)
09   1-in, 4-out DMX/RDM Splitter (eDIN #1009)

.
C-Type module (8" long - 200mm)

03   12 channel Contact Closure (eDIN #1003)
08   6 channel LED Dimmer/DC Driver (eDIN #1008)
14   Pathport eDIN 4-port gateway (eDIN #1014)
16   Pathport eDIN DMX / RDM Hub (eDIN #1016)

.

.

Power Supply (PSU)

P01 

  24VDC, 30W output; 110/240VAC 50/60 Hz input

P09   48VDC, 100W output; 110/240VAC 50/60 Hz input  (* * For use with Via5 ONLY * *)

  .
Other power supplies available on request.

.

.