Pathway eDIN Enclosures are a great way to install your eDIN modules. Available in two sizes, eDIN enclosures can accommodate several modules and a power supply.
eDIN enclosures are ETL-certified. When just about any combination of eDIN cards are factory-installed in a Pathway enclosure, the entire assembly is ETL-listed.
| Data Sheet |
Features
- Contractor friendly, sturdy steel construction
- Conduit knockouts provided on all sides
- Logical arrangement makes wiring neat and easy
- Barriered high-voltage section for power supply (power supply not included)
- Internal DIN rail can be used to mount eDIN and other standard DIN rail modules
- Modules can be pre-installed by Pathway if desired
- Black powder coat finish
- ETL listed
Model Description
| 1105 | eDIN Small enclosure |
| 1106 | eDIN Large Enclosures |
| 4000 | Pre-assembly service |
Specifications
| Size: | Small: 10.25” x 13.25” (260mm x 335mm) |
| Large: 10.25” x 23.25” (509mm x 335mm) | |
| Depth: | 4.5" (120mm) |
| Rail Space: | Small: 9.5” (240mm) |
| Large: 19.5” (495mm) | |
| Mounting: | Internal 35mm x 7.5mm DIN rail (included) |
| Power Supply: | eDIN 1001 or equivalent (not included) |
eDIN Reference Sizes
| 1002 | eDIN Opto-splitter | 4.5” (114mm) w |
| 1003 | eDIN Contact Closure | 8.0” (203mm) w |
| 1004 | eDIN DMX-to-Analog | 6.25” (160mm) w |
| 1006 | eDIN Analog-to-DMX | 8.0” (203mm) w |
| 1007 | eDIN Merger | 4.5” (114mm) w |
| 1008 | eDIN DC/LED Driver | 8.0” (203mm) w |
| 1009 | eDIN RDM Opto-splitter | 6.25” (160mm) w |