|
DMX GE and WattStopper Relay Cabinets (discontinued) |
PLEASE NOTE: These cabinets have been discontinued by GE and Wattstopper. Owners of existing installations can download documentation on the right. If the control cards have failed, we do have limited remaining stock. For information on the control cards, go here. Built using The Watt Stopper’s low-voltage relay system and Pathway adapter cards, these cabinets permit both DMX and remote switch control of relays. Ideal for relay control from a console, DMX architectural systems, or DMX show control system. DMXRelays are suitable for switching monitors, discharge lamps, fluorescent or neon loads.
Features- Relay control using both DMX and/or a wide range of switches
- Durable, positive action RR9P latching relays
- Fully programmable DMX relay softpatch
- Status quo memory maintains relay status in the event of a signal interruption
- Diagnostic functions including relay self-test
Control- Modular plug-in cards
- User selectable switching threshold
- Filters to prevent relay chatter
- Field selectable scan rate
- Two field programmable master switch assignments
Cabinet Specifications- UL & CSA Listed
- Hinged, lockable cover
- Modular construction
- Relays must be fed from an adjacent circuit breaker panel (by others)
- Sprinkler proof cabinets
Relay Specifications | Lamp Load | 20A tungsten, 125 VAC
20A ballast, 277-347 VAC
20A H.I. D. 347 VAC | | Resistive load | 20A, 347VAC | | Motor Load | ½HP at 110-125 VAC | | Endurance | 50,000 cycles at full load |
Cabinet Sizes (without covers) | CC-12 | 16 x 16 x 4.5 in. (406 x 406 x 114 mm) | | CC-24 | 22.5 x 24 x 4.5 in. (572 x 610 x 114 mm) | | CC-48 | 36 x 24 x 4.5 in. (914 x 610 x 114 mm) |
Model Description | CC-12 | DMXRelay Cabinets, with DMX interface & 12 relays | | CC-24 | DMXRelay Cabinets, with DMX interface & 24 relays | | CC-48 | DMXRelay Cabinets, with DMX interface & 48 relays |
|