|
#1003 Contact Closure Interface |
|
|
|
Pathway eDIN Contact Closure interface provides twelve DMX-controlled dry contact closures for both power and signal level switching. Multiple operating modes include momentary, maintained, 6-channel split and single channel select, where the DMX level of the start channel determines which relay is active.
Features- 12 DMX controllable form-C switch closures
- Momentary or maintained operation
- ‘DMX Present’ relay function
- DMX level display
- 6-channel alternate mode
- DMX-select mode, where DMX level corresponds to a triggered relay
- DMX start address easily set
- LED display and pushbuttons for configuration
- 2500V DMX input opto isolation
- 250V DMX fault protection
- End-of-line termination switch
- Status LEDs for power, DMX input, relay state
- Pluggable screw terminals for all connections
- DMX pass-thru connector
- Snap-on DIN rail housing
- DIN rail mounting section included
Specifications Relay Contact
Rating | 2A per relay, at up to 30VDC | | Power Supply | 9-30 VDC, 5W supply required.
Use eDIN 1001 power supply or equal. | | Isolation | 2500V opto isolation
250V fault protection | | Size | 3.5” x 8” x 1.25” (90mm x 200mm x 30mm ) | | Mounting | 35mm x 7.5mm DIN rail (included) |
Model Description | 1003 | eDIN 12 Channel Contact Closure Interface | | 1001 | Standard eDIN 30W Power Supply |
|
Products