How to Save a Show

Choreo automatically saves all changes to a non-volatile memory.  If you wish to back up to USB, insert a Fat32 formatted USB thumb drive on the rear of the controller.  

  1. Touch SetupButtononPowerScreen.pngthe Setup icon uber_tool_artboards_wrench.png.

  2. Touch Showfile on the left hand side of the screen.

  3. Select “Save to USB”.

  4. Press Exit programming_artboards_Cancel.png to return to programming once the Save to USB icon changes from red to grey again. It's then safe to remove you thumb drive.

html_help_contents.png NOTE